Forming Machine, Lab Forming Equipment, Vacuum Forming& Molding Machine for Orthodontics in Dentist Hospital,Lab Forming Equipment.

Instructions for Use and Operation1. Turn on the power and check whether the operating levers/buttons of the molding machine are normal.2. Turn the upper cover(right or left) by 90°, place the required diaphragm(not included) between the upper and lower frames, and pull down the ball puller to clamp it.3. Reset the top cover and twist the lifting handle to raise the set frame to the working height(limit lever on the upper part of the spindle).4. Place the packaged product(not included) in the center on the mesh board.5. Switch on the heating switch and heat the diaphragm(not included), when the diaphragm is heated to 0.39in below the plane of the lower frame(about two or three minutes).6. Turn off the heating switch, twist the lifting handle, lower the set frame, turn on the vacuum motor at the same time, and then remove it when the package is shaped.SpecificationColor: Blue Material: Aluminum, Stainless SteelProcess: PaintingPlug Type: US StandardVoltage: 110V, 60Hz ±10%Power: 1000W Heating Power: 600WMolding Power: 800WPower Cord Length: 1.2-1.5m/3.94-4.92ftMolding Size: 110*110mm/4.33*4.33inProduct Size: 25*21*30cm/9.84*8.27*11.81inPackage Size: 30*25*21cm/11.81*9.84*8.27inGross Weight: 6kg/13.28 lbsNet Weight: 6kg/13.28 lbsPackage Included1* Forming MachineNotes1.Please note that this product does not include diaphragms.2.Please note that after using the machine, do not forget to turn off the heating switch, otherwise, it may burn out the heater.3.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

• Precision Molding: During the molding process, the material tightly adheres to the mold, and the symmetrical heating element ensures even heat distribution, achieving stable and precise molding effects.
• High Efficiency: The high-performance heating tube and 600W heating power enable rapid heating, and the powerful motor provides strong downward suction, which can quickly cool the formed thermoplastic materials, improve production efficiency, and reduce waiting time.
• Safety Guard: The protruding knob on the top cover can help you safely push open the lid and avoid high-temperature burns.
• User Friendly: It is equipped with a limit lever on the spindle, which can firmly clamp the thermoplastic sheet. The independent heating and molding switch is easy to use and can prevent misoperation.
• Space-saving: It is compact(9.84*8.27*11.81in) and does not take up much space, making it particularly suitable for small dental clinics or laboratories.
• Easy to Maintain: Its simple structure and smooth surface make it easy to clean and maintain, keeping the machine in good working condition.